01
Pylon & Pole Signs
High-visibility structures for road frontage and interchanges.
Exterior Signs
Exterior Commercial Signs in Florida
Everything on the outside of the building and out on the site: pylon and monument structures, channel letters, illuminated cabinets, canopy fascia and directional signage.
Exterior Signs
Outside is where Florida is hardest on a sign.
Exterior signage takes hurricane-season wind loads, salt air, driving rain and relentless UV. Material gauge, pan depth, mounting detail and coating all decide whether it still looks like your brand in year eight.
We engineer to Miami-Dade and Broward standards where the location calls for it, and specify heavier material based on the site rather than the quote.
Capabilities
Exterior Sign Types
Six categories that cover most commercial exteriors.
02
Monument Signs
Ground-level structures in stone, brick, aluminium and composite.
03
Channel Letters
Front-lit, back-lit and halo-lit lettering on building fascias.
04
Illuminated Cabinets
Cabinet and wall signage sized to the elevation.
05
Canopy & Fascia Signs
Branding across canopies, forecourts and covered walkways.
06
Directional & Wayfinding
On-site traffic flow, entry, exit and parking signage.
Why It Matters
Engineered for the location, not the catalogue.
A sign 20 miles inland and a sign on a coastal corner are not the same sign, even if they look identical. Wind exposure, salt and mounting substrate all change the specification, and that is decided at survey rather than assumed.
- ✓ Miami-Dade and Broward wind-load engineering where required
- ✓ Heavier-gauge aluminium and deeper pan forms on exposed sites
- ✓ Reinforced mounting points for coastal durability
- ✓ Sealed structural drawings prepared for permit
Process
How an Exterior Sign Happens
Survey first, because the site decides the specification.
01
Site Survey
Frontage, setbacks, structure, power and access recorded.
02
Design & Engineering
Sized to code, engineered to wind load.
03
Permitting
Submitted and tracked through plan review.
04
Fabrication
Built in our own Florida shop.
05
Installation
Set and wired by our own crews and equipment.
06
Final Inspection
Municipal sign-off, then handover.
Common Questions
Questions, answered.
Anything not covered here, our team will walk you through scope, timing and cost.
What is the difference between a pylon and a monument sign?
A pylon sign is elevated on one or more poles for visibility from the road, while a monument sign sits at ground level as a lower, more architectural marker. There is a fuller comparison on our pylon versus monument page.
Do exterior signs need engineering in Florida?
In most jurisdictions yes. Sealed structural drawings and wind-load certification are usually required before a permit will issue, and coastal locations are stricter.
How long do exterior signs last in Florida?
It depends heavily on material specification, coating and exposure. Correct gauge, pan depth and finishing matter far more than the initial price, which is why we specify from the survey.
Can you replace just the face on an existing exterior sign?
Often yes. Replacement pan-formed and flat faces are fabricated to match existing cabinets, which is common on rebrands.
Related
What usually comes next.
The services most clients pair with this one.
Start Your Project
Need exterior signage in Florida?
Tell us the scope, the site and the timeline. We will come back with next steps and a site survey where it is needed.
Related
What usually comes next.
The services most clients pair with this one.
FAQ
Frequently asked questions.
What is the difference between a pylon and a monument sign?
A pylon sign is elevated on one or more poles for visibility from the road, while a monument sign sits at ground level as a lower, more architectural marker. There is a fuller comparison on our pylon versus monument page.
Do exterior signs need engineering in Florida?
In most jurisdictions yes. Sealed structural drawings and wind-load certification are usually required before a permit will issue, and coastal locations are stricter.
How long do exterior signs last in Florida?
It depends heavily on material specification, coating and exposure. Correct gauge, pan depth and finishing matter far more than the initial price, which is why we specify from the survey.
Can you replace just the face on an existing exterior sign?
Often yes. Replacement pan-formed and flat faces are fabricated to match existing cabinets, which is common on rebrands.
Related Projects
View All in Gallery →
View project
Jareds – Kissimmee
Kissimmee, FL
View project
Jareds – Altamonte
Altamonte, FL
View project
Spirit Halloween – Jacksonville (#Argyle)
Jacksonville, FL
View project
Econolodge – Daytona Beach
Daytona Beach, FL
Start Your Project
Need exterior signage in Florida?
Tell us the scope, the site and the timeline. We will come back with next steps and a site survey where it is needed.